What are the international standards followed by Grey Hawk for Cable Lugs?
Grey Hawk Cable Lugs are manufactured in accordance with DIN, IS, BS, and IEC standards. We can manufacture cable lugs according to customer requirements.
What is the grade of copper used by Grey Hawk for manufacturing Cable Lugs?
Grey Hawk cable lugs are manufactured using high grade EC or ETP copper. Since EC copper has a purity of 99.9% and it gives conductivity of 100% IACS, they are widely used in the electrical industry.
Why are cable lugs Tin plated?
Copper reacts with oxygen and a thin layer of oxide is formed on the surface, which decreases conductivity of copper. Cable lugs are Tin plated to prevent them from corrosion.
What is the thickness of tin plating on the copper cable lugs?
Grey Hawk cable lugs are normally tin electroplated to a minimum thickness of 6 to 7 microns. This can also be increased according to customer requirement.
Can Grey Hawk Electrical manufacture copper cable lugs according to drawings and dimensions?
Yes, we are capable of manufacturing copper cable lugs according to customer requirements, based on drawings or samples.
What is the voltage rating of copper cable lugs manufactured by Grey Hawk Electrical?
Our range of copper cable lugs are manufactured for use up to 33kv voltage rating.
What is the range of copper cable lugs offered by Grey Hawk Electrical?
We offer range of copper cable lugs from 0.5mm2 to 1000mm2.
What is the International standard followed by Grey Hawk for cable glands?
Grey Hawk cable glands are manufactured in accordance with BS 6121: 1989- part 1 that is similar to the new European standard for cable gland EN 50262: 1999.